Gate Panel Replacement
A gate at a Public Storage facility on W. 86th St was hit overnight and the panel was ruined. SMS made it safe right away, then replaced the whole panel on the existing operator.
The Project
From emergency repair to new panel
When the gate was hit overnight, the bottom rail was completely broken. SMS responded after hours, straightened and patched the rail, and welded the tensioner cable end so the gate could keep working in the meantime.
A matching AutoGate replacement panel is a special order, and the manufacturer's lead time was four to six weeks. As soon as it arrived, our crew removed the failed panel, hung and adjusted the new one on the existing operator, and verified the gate's operation. We brought our own Bobcat and trailer to move the 24-foot panel.
Takeaways for operators
What this job shows about a damaged gate
Make it safe first, replace it right. A hit gate does not have to sit broken while a new panel is on order. Here the temporary rail repair and welded cable end kept the gate working through the four-to-six-week manufacturer lead time.
Keep the operator when you can. The operator was not the problem, so the new panel went onto the existing operator. That kept the job to the panel, its hanging and adjustment, and a check of the gate's operation.
Bring the right equipment. A 24-foot panel is too big to move by hand. Our crew brought its own Bobcat and trailer so the facility did not have to arrange anything.
Indiana facilities can request Same Day Dispatch when a gate goes down; Ohio, Kentucky, Illinois and Missouri sites get scheduled service. See also our guide to a gate that won't open.
Project Photos






